| human | Q5 |
| P3835 | Mendeley person ID | ricardo-faria-ribeiro |
| P496 | ORCID iD | 0000-0003-4211-0542 |
| P3829 | Publons author ID | 2897836 |
| P1053 | ResearcherID | A-1228-2008 |
| P1153 | Scopus author ID | 7202534661 |
| P69 | educated at | Faculdade de Odontologia de Ribeirão Preto | Q10279561 |
| P108 | employer | Faculdade de Odontologia de Ribeirão Preto | Q10279561 |
| P734 | family name | Ribeiro | Q21452666 |
| Ribeiro | Q21452666 | ||
| Ribeiro | Q21452666 | ||
| P735 | given name | Ricardo | Q15720871 |
| Ricardo | Q15720871 | ||
| P106 | occupation | researcher | Q1650915 |
| P21 | sex or gender | male | Q6581097 |
| Q89568128 | A 3-year longitudinal prospective study assessing microbial profile and clinical outcomes of single-unit cement-retained implant restorations: Zirconia versus titanium abutments |
| Q40459192 | A Digital Image Correlation Analysis of Strain Generated by 3-Unit Implant-Supported Fixed Dental Prosthesis: An In Vitro Study. |
| Q50959975 | A Three-Dimensional Finite Element Analysis of the Stress Distribution Generated by Splinted and Nonsplinted Prostheses in the Rehabilitation of Various Bony Ridges with Regular or Short Morse Taper Implants. |
| Q61922457 | A three-dimensional finite element analysis of the stress distribution on morse taper implants surface |
| Q46478093 | Abutment rotational freedom evaluation of external hexagon single-implant restorations after mechanical cycling. |
| Q87385521 | Abutments with reduced diameter for both cement and screw retentions: analysis of failure modes and misfit of abutment-crown-connections after cyclic loading |
| Q33399620 | An alternative section method for casting and posterior laser welding of metallic frameworks for an implant-supported prosthesis |
| Q43291784 | An in vitro study of non-axial forces upon the retention of an O-ring attachment. |
| Q43549988 | Bacterial adhesion on the titanium and zirconia abutment surfaces. |
| Q40492053 | Biomechanical behavior of titanium and zirconia frameworks for implant-supported full-arch fixed dental prosthesis |
| Q73663614 | Castability and resistance of ceramometal bonding in Ni-Cr and Ni-Cr-Be alloys |
| Q51272337 | Clinical evaluation of interocclusal recording materials in bilateral free end cases. |
| Q47624211 | Comparative study of chemical and mechanical retentive systems for bonding of indirect composite resin to commercially pure titanium |
| Q78500891 | Comparative study of circumferential clasp retention force for titanium and cobalt-chromium removable partial dentures |
| Q34581456 | Comparative study of two commercially pure titanium casting methods |
| Q40166536 | Comparison of the correlation of photoelasticity and digital imaging to characterize the load transfer of implant-supported restorations. |
| Q35349359 | Correlation between vertical misfits and stresses over implants from castable frameworks made of different alloys. |
| Q49597842 | Custom Morse taper zirconia abutments: Influence on marginal fit and torque loss before and after thermomechanical cycling |
| Q74183301 | Device for recording the path of insertion for removable partial dentures |
| Q39973859 | Digital image correlation analysis of the load transfer by implant-supported restorations. |
| Q39987544 | Digital image correlation analysis on the influence of crown material in implant-supported prostheses on bone strain distribution. |
| Q33815972 | Ear symptomatology and occlusal factors: a clinical report |
| Q54117130 | Effect of beryllium on the castability and resistance of ceramometal bonds in nickel-chromium alloys. |
| Q35162751 | Effect of cyclic loading on the vertical microgap of long-span zirconia frameworks supported by 4 or 6 implants. |
| Q61922473 | Effect of different investments and mold temperatures on titanium mechanical properties |
| Q39943148 | Effect of phosphate-bonded investments on titanium reaction layer and crown fit. |
| Q46388531 | Effect of repeated torque/mechanical loading cycles on two different abutment types in implants with internal tapered connections: an in vitro study. |
| Q46552902 | Effect of surface treatment on the bond strength between yttria partially stabilized zirconia ceramics and resin cement |
| Q84590544 | Effect of whitening toothpaste on titanium and titanium alloy surfaces |
| Q84295312 | Effects of chemical composition on the corrosion of dental alloys |
| Q92157293 | Effects of surface treatments on mechanical behavior of sintered and pre-sintered yttria-stabilized zirconia and reliability of crowns and abutments processed by CAD/CAM |
| Q37780007 | Endodontically treated teeth: characteristics and considerations to restore them. |
| Q81094448 | Evaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique |
| Q38969131 | Experimental titanium alloys for dental applications. |
| Q47291260 | Fabrication of an acrylic resin device used to increase the size of toothbrush handles |
| Q39095612 | Fracture Strength of Weakened Anterior Teeth Associated to Different Reconstructive Techniques. |
| Q88607652 | Fracture loads and failure modes of customized and non-customized zirconia abutments |
| Q50040195 | Genome analysis and clinical implications of the bacterial communities in early biofilm formation on dental implants restored with titanium or zirconia abutments. |
| Q45301167 | Impact of temperature and time storage on the microbial detection of oral samples by Checkerboard DNA-DNA hybridization method. |
| Q41852756 | Importance of a distal proximal contact on load transfer by implant-supported single adjacent crowns in posterior region of the mandible: a photoelastic study. |
| Q47415766 | Improvement to the marginal coping fit of commercially pure titanium cast in phosphate-bonded investment by using a simple pattern coating technique. |
| Q51614347 | In Vitro Fit and Cementation Resistance of Provisional Crowns for Single Implant-Supported Restorations. |
| Q40036295 | In vitro cytotoxicity of dental alloys and cpTi obtained by casting. |
| Q43730292 | In vivo evaluation of Candida spp. adhesion on titanium or zirconia abutment surfaces. |
| Q40335343 | Influence of Cyclic Fatigue in Water on Screw Torque Loss of Long-Span One-Piece Implant-Supported Zirconia Frameworks |
| Q55329529 | Influence of Manufacturing Methods of Implant-Supported Crowns on External and Internal Marginal Fit: A Micro-CT Analysis. |
| Q86223937 | Influence of the casting processing route on the corrosion behavior of dental alloys |
| Q51235078 | Influence of the interimplant distance on crestal bone resorption and bone density: a histomorphometric study in dogs. |
| Q42084905 | Internal adaptation of cast titanium crowns. |
| Q96579241 | Internal and Marginal Fit and Fracture Strength of Narrow Diameter Dental Implant-Abutment Assembly |
| Q53634944 | Loss of preload in screwed implant joints as a function of time and tightening/untightening sequences. |
| Q46671291 | Marginal fit and microbial leakage along the implant-abutment interface of fixed partial prostheses: An in vitro analysis using Checkerboard DNA-DNA hybridization. |
| Q42072158 | Mechanical analysis of conventional and small diameter conical implant abutments. |
| Q44553700 | Mechanical comparison of experimental conical-head abutment screws with conventional flat-head abutment screws for external-hex and internal tri-channel implant connections: an in vitro evaluation of loosening torque. |
| Q35855125 | Microbiome of titanium and zirconia dental implants abutments |
| Q38935823 | Microleakage at Different Implant-Abutment Connections Under Unloaded and Loaded Conditions |
| Q33530695 | Modified section method for laser-welding of ill-fitting cp Ti and Ni-Cr alloy one-piece cast implant-supported frameworks. |
| Q48213079 | Oral bacterial colonization on dental implants restored with titanium or zirconia abutments: 6-month follow-up |
| Q50501223 | Oral biofilm formation on the titanium and zirconia substrates. |
| Q61922484 | Photoelastic Analysis of Stresses Transmitted by Universal Cast to Long Abutment on Implant-Supported Single Restorations Under Static Occlusal Loads |
| Q51728764 | Photoelastic comparison of as-cast and laser-welded implant frameworks. |
| Q39975573 | Photoelastic stress analysis of different designs of cement-retained fixed partial dentures on Morse taper oral implants. |
| Q39932105 | Reliability of FEA on the Results of Mechanical Properties of Materials |
| Q61922470 | Retention and stress distribution in distal extension removable partial dentures with and without implant association |
| Q40473475 | Strain transfer behavior of different planning options for mandibular single-molar replacement. |
| Q35870748 | Stress Over Implants of One-Piece Cast Frameworks Made With Different Materials |
| Q73807860 | Surveying removable partial dentures: the importance of guiding planes and path of insertion for stability |
| Q51075888 | Tensile Strength of Resin Cements Used with Base Metals in a Simulating Passive Cementation Technique for Implant-Supported Prostheses. |
| Q47924645 | Tensile bond strength of cast commercially pure titanium and cast gold-alloy posts and cores cemented with two luting agents |
| Q61922493 | Tensile bond strength of cast commercially pure titanium dowel and cores cemented with three luting agents |
| Q84770752 | The effect of coating patterns with spinel-based investment on the castability and porosity of titanium cast into three phosphate-bonded investments |
| Q33297953 | The effect of commercially pure titanium and alternative dental alloys on the marginal fit of one-piece cast implant frameworks |
| Q39742753 | The effect of mold temperature on castability of CP Ti and Ti-6Al-4V castings into phosphate bonded investment materials. |
| Q48164621 | The use of a mandibular repositioning device for obstructive sleep apnea |
| Q61922487 | Three-Dimensional Finite Element Analysis of Stress Distribution on Different Bony Ridges With Different Lengths of Morse Taper Implants and Prosthesis Dimensions |
| Q85194861 | Three-dimensional finite element analysis of endodontically treated teeth with weakened radicular walls restored with different protocols |
| Q51642583 | Torque loss of different abutment sizes before and after cyclic loading. |
| Q40245813 | Torque loss under mechanical cycling of long-span zirconia and titanium-cemented and screw-retained implant-supported CAD/CAM frameworks. |
| Q39977509 | Torque removal evaluation of prosthetic screws after tightening and loosening cycles: an in vitro study. |
| Q40112658 | Validation of finite element models for strain analysis of implant-supported prostheses using digital image correlation. |
| Q36162375 | Wear resistance and compression strength of ceramics tested in fluoride environments |
| Q45341192 | Wear resistance of experimental titanium alloys for dental applications |
Search more.