| human | Q5 |
| P6178 | Dimensions author ID | 012426111504.65 |
| P1960 | Google Scholar author ID | C1DD8ksAAAAJ |
| P856 | official website | http://www.mech.kyushu-u.ac.jp/~fcsl/en/people-en/profile-nakajima-en/ |
| P496 | ORCID iD | 0000-0003-2335-4226 |
| P1153 | Scopus author ID | 7404046109 |
| P10861 | Springer Nature person ID | 012426111504.65 |
| P69 | educated at | Kyoto University | Q336264 |
| P108 | employer | University of California, Berkeley | Q168756 |
| Kyushu University | Q1188786 | ||
| Lawrence Berkeley National Laboratory | Q1133630 | ||
| P106 | occupation | researcher | Q1650915 |
| P21 | sex or gender | male | Q6581097 |
| Q57968592 | Analysis and visualization of water flow impact on hydrogen production efficiency in solid polymer water electrolyzer under high-pressure condition |
| Q57968685 | Analysis of tungsten film electrodeposited from a ZnCl2–NaCl–KCl melt |
| Q57968680 | Best Combination of Gas Diffusion Layers for Polymer Electrolyte Fuel Cell under Cathode Condition of Very Low Humidity |
| Q57968570 | Challenging of Reducing Electrolysis Voltage by Superimposing Boiling on PEMWE–A Thermodynamic Coupling– |
| Q57968589 | Characterization of an electrochemical hydrogen pump with internal humidifier and dead-end anode channel |
| Q57968620 | Comparison of humidified hydrogen and partly pre-reformed natural gas as fuel for solid oxide fuel cells applying computational fluid dynamics |
| Q57968569 | Concentration Gradient of Reactants Extending from Reaction Sites Inward Inlet Periphery of Fuel Cells |
| Q57968661 | Current Distribution Analysis of a Microtubular Solid Oxide Fuel Cell with Surface Temperature Measurements |
| Q57968633 | Current Distribution Measurement of a Microtubular Solid Oxide Fuel Cell |
| Q57968594 | Current and temperature distributions in-situ acquired by electrode-segmentation along a microtubular solid oxide fuel cell operating with syngas |
| Q57968635 | Development of Direct Internal Reforming SOFC Integrated with Paper-Structured Catalyst Fuelled by Biofuels |
| Q57968664 | Development of a PEFC with Serpentine-Interdigitated Hybrid Pattern Gas Channels |
| Q57968596 | Diagnosis Method to Detect the Incorporation of Metallic Particles in a Lithium Ion Battery |
| Q57968597 | Direct Current Distribution Measurement of an Electrolyte-Supported Planar Solid Oxide Fuel Cell under the Rib and Channel by Segmented Electrodes |
| Q57968688 | Direct water balance analysis on a polymer electrolyte fuel cell (PEFC): Effects of hydrophobic treatment and micro-porous layer addition to the gas diffusion layer of a PEFC on its performance during a simulated start-up operation |
| Q57968598 | Effect of Electrode Mixing Conditions on the Performance of Lithium-Ion Batteries Analyzed by Fast Fourier Transform Electrochemical Impedance Spectroscopy |
| Q57968667 | Effect of Flow Field Pattern and Microporous Layer on Gas Purge of a Polymer Electrolyte Fuel Cell |
| Q57968566 | Effect of flow-field pattern and flow configuration on the performance of a polymer-electrolyte-membrane water electrolyzer at high temperature |
| Q57968618 | Effect of through-plane distribution of polytetrafluoroethylene in carbon paper on in-plane gas permeability |
| Q57968675 | Effects of Design Parameters in Paper Type Gas Diffusion Layer on the Performance of Polymer Electrolyte Fuel Cells |
| Q57968637 | Electrochemical Characterization of Hydrogen Pump with Internal Humidifier and Dead-End Anode Channel |
| Q57968681 | Electrochemical Impedance Parameters for the Diagnosis of a Polymer Electrolyte Fuel Cell Poisoned by Carbon Monoxide in Reformed Hydrogen Fuel |
| Q57968668 | Electrochemical Impedance Spectroscopy Analysis of an Anode-Supported Microtubular Solid Oxide Fuel Cell |
| Q57968698 | Electrochemical Impedance Spectroscopy Study of a Hydrogen Electrode Reaction at a Zn Electrode in a Molten LiCl−KCl−LiH System |
| Q57968658 | Electrochemical Impedance Spectroscopy Study of the Mass Transfer in an Anode-Supported Microtubular Solid Oxide Fuel Cell |
| Q57968700 | Electrodeposition of Metallic Tungsten in ZnCl[sub 2]-NaCl-KCl-WCl[sub 4] Melt at 250°C |
| Q57968691 | Electrodeposition of Refractory Metals from Some ZnCl2 Based Molten Salts at 150-250{degree sign}C |
| Q57968694 | Electrodeposition of metallic molybdenum films in ZnCl2–NaCl–KCl–MoCl3 systems at 250°C |
| Q57968689 | Electrodeposition of metallic tungsten films in ZnCl2–NaCl–KCl–KF–WO3 melt at 250 C |
| Q57968684 | Estimation of Water Layer Thickness Adjacent to the Cathode Catalyst Layer of a PEFC (Analysis Using Electrochemical Impedance Spectroscopy) |
| Q113268402 | Evaluation of Three-Dimensional Placement of Built-in Catalytic Partial Oxidation Catalyst in an Anode-Supported Honeycomb SOFC |
| Q57968638 | Flow Channel Configurations of an Anode-Supported Honeycomb Solid Oxide Fuel Cell |
| Q57968565 | Gas Diffusion Media and NaCl Contamination of Polymer Electrolyte Fuel Cells for Marine Applications |
| Q57968600 | Gas diffusion layers coated with a microporous layer containing hydrophilic carbon nanotubes for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions |
| Q57968572 | Glass Shape Change during Firing for Improving the Seal of Planar SOFCs |
| Q57968583 | Hydrogen production with CuO/ZnO nanowire catalyst for a nanocatalytic solar thermal steam-methanol reformer |
| Q57968663 | Hydrophilic and Hydrophobic Double MPL Coated GDL to Enhance PEFC Performance under Low and High Humidity Conditions |
| Q57968647 | Hydrophilic and hydrophobic double microporous layer coated gas diffusion layer for enhancing performance of polymer electrolyte fuel cells under no-humidification at the cathode |
| Q57968602 | Impact of Cathode Current Collector on High Temperature PEM Water Electrolysis |
| Q57968622 | Impact of Water Flow Rate on Current Efficiency in Solid Polymer Water Electrolyzer Under 2 MPa Condition |
| Q57968580 | Impedance Spectra Associated with Metal Deposition at the Negative Electrode from Contaminating Metal Particles at the Positive Electrode in a Lithium Ion Battery |
| Q57968574 | In SituMeasured Spatial Temperature Variations for Improving Reliability of Numerical SOFC Tools |
| Q57968649 | In-Plane Liquid Water Distribution at the Interface between the Gas Diffusion Layer and Catalyst Layer in the Cathode of a Polymer Electrolyte Fuel Cell with a Hybrid Pattern Flow Field |
| Q57968575 | In-Situ Analysis of the in-Plane Current Distribution Difference between Electrolyte-Supported and Anode-Supported Planar Solid Oxide Fuel Cells by Segmented Electrodes |
| Q57968579 | In-Situ Analysis of the in-Plane Current Distributions in an Electrolyte-Supported Planar Solid Oxide Fuel Cell by Segmented Electrodes |
| Q57968605 | In-situ diagnosis and assessment of longitudinal current variation by electrode-segmentation method in anode-supported microtubular solid oxide fuel cells |
| Q57968606 | Influence of Convective Heat Transfer by Air Flow on Local Current/Temperatures along Microtubular Solid Oxide Fuel Cells In-situ Identified by Electrodesegmentation Method for Co- and Counter-flow Configurations |
| Q57968623 | Influence of GDL Coated with MPL Containing CNTs on PEFC Performance Under Low and High Humidity Conditions |
| Q57968676 | Influence of Gas Diffusion Layers with Microporous Layer on the Performance of Polymer Electrolyte Fuel Cells |
| Q57968651 | Influence of Hydrohilic and Hydrophobic Double MPL Coated GDL on PEFC Performance |
| Q57968671 | Influence of Hydrophilic and Hydrophobic Double MPL Coated GDL on PEFC Performance without Cathode Humidification |
| Q57968608 | Influence of Hydrophilic and Hydrophobic Triple MPL Coated GDL on the Oxygen Transport Resistance in a PEFC under High Humidity Conditions |
| Q57968640 | Influence of Triple MPL Coated GDL on the PEFC Performance under Low and High Humidity |
| Q57968708 | Infrared Spectroscopy of Molten LiCl-KCl-LiH |
| Q57968707 | Infrared Spectroscopy of Molten LiCl−KCl under Hydrogen Gas Atmosphere |
| Q57968629 | Lattice Boltzmann Modeling of the Gas Diffusion Layer of the Polymer Electrolyte Fuel Cell with the Aid of Air Permeability Measurements |
| Q57968610 | Mass Transfer in an Anode-Supported Honeycomb Solid Oxide Fuel Cell |
| Q57968559 | Mass transport limitation in inlet periphery of fuel cells: Studied on a planar Solid Oxide Fuel Cell |
| Q57968591 | Microporous Layer-Coated Gas Diffusion Layer for Performance Enhancement of Polymer Electrolyte Fuel Cells without Humidification Using Anode Gas Recirculation |
| Q57968672 | Microporous layer coated gas diffusion layers for enhanced performance of polymer electrolyte fuel cells |
| Q57968588 | Microporous layer-coated gas diffusion layer to reduce oxygen transport resistance in a polymer electrolyte fuel cell under high humidity conditions |
| Q57968642 | Novel hydrophilic and hydrophobic double microporous layer coated gas diffusion layer to enhance performance of polymer electrolyte fuel cells under both low and high humidity |
| Q57968582 | Optimum structural properties for an anode current collector used in a polymer electrolyte membrane water electrolyzer operated at the boiling point of water |
| Q57968652 | Performance Evaluation of an Anode-supported Honeycomb Solid Oxide Fuel Cell |
| Q57968616 | Performance of an Anode-Supported Honeycomb Solid Oxide Fuel Cell |
| Q57968611 | Processes Involving in the Temperature Variations in Solid Oxide Fuel Cells In-Situ Analyzed through Electrode-Segmentation Method |
| Q57968561 | Real-time electrochemical impedance spectroscopy diagnosis of the solid oxide fuel cell for marine power applications |
| Q57968587 | Reliability of the numerical SOFC models for estimating the spatial current and temperature variations |
| Q57968577 | Segmented Electrode Analysis of an Anode-Supported Planar Solid Oxide Fuel Cell for the Diagnosis of Marine Power Applications |
| Q57968644 | Study on paper-structured catalyst for direct internal reforming SOFC fueled by the mixture of CH4 and CO2 |
| Q57968614 | Synthesis of a Bimetallic Dodecaborate LiNaB12H12 with Outstanding Superionic Conductivity |
| Q57968693 | The Surface Adsorption of Hydride Ions and Hydrogen Atoms on Zn Studied by Electrochemical Impedance Spectroscopy with a Non-Equilibrium Thermodynamic Formulation |
| Q57968711 | The single electrode Peltier heats of Li+/Li, H2/H− and Li+/Pd–Li couples in molten LiCl–KCl systems |
| Q57968678 | Thermal Analysis of a Microtubular Solid Oxide Fuel Cell Using Electrochemical Impedance Spectroscopy |
| Q57968703 | Thermodynamic Investigations of Nitrogen Electrode Reaction in a LiCl-KCl-CsCl Melt |
| Q57968712 | Thermodynamic Investigations of a Hydrogen Electrode Reaction in a Molten LiCl-KCl-LiH System |
| Q57968704 | Thermodynamics of the N2/N3-Redox Couple in a LiBr−KBr−CsBr Melt |
| Q57968563 | Three-dimensional flow channel arrangements in an anode-supported honeycomb solid oxide fuel cell |
| Q57968627 | Triple microporous layer coated gas diffusion layer for performance enhancement of polymer electrolyte fuel cells under both low and high humidity conditions |
| Q57968646 | Water Vapor Exchange Flow Channels to Enhance the Performance of Polymer Electrolyte Fuel Cells without Cathode Humidification |
| Q57968654 | Water vapor exchange system using a hydrophilic microporous layer coated gas diffusion layer to enhance performance of polymer electrolyte fuel cells without cathode humidification |
Search more.